How Do You Prepare A Deck For Sealing?

How do you seal a deck for the first time?

Apply the deck sealer with a natural bristle brush.

A roller is faster, but brushing helps force the sealer into open pores and grain.

Make sure to get the sealer into joints where two boards butt together.

Apply the deck sealer to three or four boards at once, working their entire length..

What is the best way to protect a wood deck?

Protect the investment in your wooden desk by taking these 10 preventive measures:Don’t trap dirt. … Catch that grease. … Sweep it up. … Shovel it off. … Clean and seal regularly. … Take special steps for a new deck. … No matter the age, always make sure your deck is sealed. … Even pressure treated wood needs to be sealed.More items…•

Can you put deck sealer over paint?

Once painted, the surface must be sealed with a clear polyurethane sealer.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What is the best wood deck sealer?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

Should you put a sealer over stain?

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats. … Be prepared for drying time to take at least a day.

How often should a deck be stained and sealed?

For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.

Is Thompson Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

Should you pressure wash your deck before staining?

Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result. A good deck cleaner can remove the gray fibers, dirt, mold, mildew and other impurities deep in the wood.

What is good to put on a deck to prevent splinters?

Keeping this in consideration, what to put on wood to prevent splinters? Apply a coat of outdoor penetrating wood sealant, like the kind used on wood decks, to protect the wood and prevent future splintering. This is especially important if the swing is made of a soft wood, such as pine.

Is it too late to seal my deck?

As a general rule, expect to wait approximately 30 days before scheduling professional deck sealing. However, in the case of intense wood grains such as cedar and mahogany, you may want to seal the deck earlier — perhaps within one or two weeks.

Can I leave my deck untreated?

It may be many years before an untreated deck becomes completely unusable. However, a deck that is properly sealed and maintained with a yearly maintenance program consistently outlive a deck that is left to its own devices by a significant margin.

Do I need to clean my deck before sealing?

Cleaning and sealing a deck is a two-day project. After washing your deck, it may need to dry thoroughly before applying a sealer. Once the sealer has been applied, it also needs to dry before you can use your deck. For some products, two coats are recommended.

How do I prepare my deck for Thompson’s Water Seal?

InstructionsPrepare the Area. Spray plants, grass, and other vegetation below or near the deck with water. … Prepare the Deck for Cleaning. … Clean the Deck Railings. … Clean the Deck Boards. … Check for Loose or Raised Fasteners. … Seal or Stain the Railings. … Seal or Stain the Deck Boards.

How long does Thompson Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years. This is dependent on conditions such as orientation of the wall and local climate.

How do I keep my decking looking natural?

If you’re happy with how your deck looks and just want a basic level of protection to keep it from getting grey and weathered, consider a decking protector. It’ll protect your decking from sunlight and rain, as well as resisting damage from foot-traffic, and being translucent it won’t change the appearance of the wood.

How long after power washing can you seal a deck?

24 to 36 hoursAfter completing the deck power washing, wait 24 to 36 hours before applying sealer. If the weather is cool or humid, wait 48 to 72 hours. The deck must be thoroughly dry to ensure deep penetration of the sealer.